7inch Monitor Arm Desk Clamp

Found myself working on quite a few SBCs recently and instead of having to pull out a monitor every time I wanted to take a look at what the machine was outputting, figured I'd mount a small monitor to my desk.

However, after some searching I couldn't find one that fit my needs. So I went ahead and deisgned one for myself. Took quite a few variations to get the design how I wanted it and figured I'd share it.

The holes in the C Clamp and Arms are M5 holes, but you can also use 10-32 screws as they are similar enough to fit. The screen is a simpe 7" display found on Amazon (link below). I'd recommend printing the C Clamp at an angle, it's given me the best strength results of the different versions so far.

7" Screen: https://a.co/d/gdjBprV

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

No

Supports:

Yes

.2

Infill:

25%