DIY Servo Tester (for +180deg Servos!!!)

Below I have provided the stl files and ready g-code files tailor-made for Prusa MK4!

Print Settings:

• Nozzle: 0.4mm
• Layer Height: 0.2mm
• Infill: 60%
• Perimeters: 3
• No brim or Raft
• Use Supports (Case.stl, Lid.stl, Knob.stl)
• Don't Use Supports (Separator.stl, Seamer.stl)

More Details for this project are followed with BOM list, code, 30 steps only building guide and electrical schematics on my GitHub Repository(here)

Open-Source Main Arduino Code here!

Electrical Schematic here!

BOM and Build Guide here!

Also my OnShape CAD Document here!