FlashForge Adventurer 5m Screen Bezel: With and Without Stylus Holder

A screen bezel and a stylus holder for the FlashForge Adventurer 5m. One M3x6 or M3x5 bolt or screw is required to securely fasten the stylus holder to the cover. A bit of super glue might help as well. The screen covers should be printed face down for best results. The stylus holder should be printed upright with a single support on the peg in the back. The stylus holder and cover are a tight fit, press very firmly until it is flush in place. Then secure with the screw. Don't like the stylus holder? Just use the plain screen cover. Take a look at my custom Adventurer 5M Door and lid handles or any of my other Adventurer 5M Add-ons while you are here.

Nozzle: .4

Filament: PLA/PETG

Resolution: .2

Like My Work?

Buy Me a Coffee

or

Follow Me