Eevee/Flareon Evolution Hueforge Art

This is a Hueforge STL of an Eevee/Flareon Evolution I found on the internet that I liked.  I take no ownership claims of the artwork itself.  I just ran it through Hueforge to get the STL and instructions.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 139.25x215.61mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #15 (1.28mm) swap to Pure Yellow
At layer #20 (1.68mm) swap to White for the rest.