BTT Pad7 - Extrusion Rail Mount

This is a mount for the BTT Pad 7 that incorporates a base (see https://www.printables.com/model/828776-bigtreetech-pad7-mount OR https://www.printables.com/model/785294-bigtreetech-pad7-mount) that I made - but since I moved around things in my print room - I needed a new mount - so I designed a base plate that incorporates the existing back plate and mounts directly to the extrusion rails! 

I modified the previous base mounts to include a hole thru the leg to get access to tighten or loosen the extrusion nuts.

I used the regular t-slot nuts and a M4x10 screw. It is a little tight, but once you get the slot nut to slide properly - it will secure nicely. 

Recommend setting the extrusion rail base first - then apply some super glue to fasten the BTT Pad7 mount to the extrusion base.

Printed with 3 walls, 20% Cubic, organic supports on.