Saddles for pipe insulation
A bracket that holds a 15A pipe covered with insulation.
10
23
0
119
updated July 22, 2024
Description
PDF- It became necessary to repair water pipes.
- I needed some plumbing saddles, and I needed them to be easy to install and release.
- Ender3V3, 0.3 layer height, 35% cross hatch infill, PETG, about 1H print time
- The outer diameter of the insulation material of the 15A pipe was 60MM.
- The diameter of the hole is 5 pi, and the spacing between the holes is 90MM.
- Anyone who needs it can use it.
Tags
Model origin
The author marked this model as their own original creation.
