IKEA Korken Hygrometer and Boveda holder

Holder for a hygrometer and a 8g Boveda package in the lid of IKEA Korken jars
5
16
0
164
updated July 21, 2024

Description

PDF

I wanted to have a clean solution to hold a hygrometer and a boveda pack for my IKEA Korken jars. This solution fits completely into the lid and doesn't stick out. It requires around 3-4g filament to print both parts.

I use the 1L Korken Jars with 8g Boveda packs and this cheap hygrometer (Color: FY-11 No Cable) from aliexpress. 

Dimensions of the hygrometer are around 45x25x15mm.

Print recommendation: 

  • use ABS (PLA didn't bend well)
  • 0.3mm Layer Height
  • print it solid (it's just 1.2mm thick)

Installation steps:

  1. (Optional) Take the lid of the jar
  2. Lay your hygrometer face down into the lid
  3. Insert one side of the hygrometer holder into the lid so that the “bunny ears” reach into the groove 
  4. Now with both hands take the other two “bunny ears”, bend the complete holder a bit and put the “bunny ears” into the groove
  5. press down the holder to the hygrometer so it snaps in
  6. Take your Boveda package and arrange it over the hygrometer as shown on the pictures
  7. Insert the Boveda package holder 90° rotated to the hygrometer holder
  8. (Optional) if you removed the lid you can mount it now

Tags



Model origin

The author marked this model as their own original creation.

License


Highlighted models from creator

View more