All In One 3D Print Test Model

This 3D print model helps you test and fine-tune your printer’s performance. It includes various features to check for stringing, bridging, overhangs, diameters, and wall precision.

Features:

• Stringing: Small gaps and tall poles to spot any stringing issues.

• Bridging: Different bridge lengths to test unsupported printing.

• Overhangs: Angles from 1° to 80° to see how well your printer handles without support material.

• Diameter: Small to large holes to check dimensional accuracy.

• Wall Thickness: Various wall sizes to test consistent extrusion and accuracy.

Print Settings:

• Layer Height: 0.2 mm

• Infill: 15-20%

• Speed: 50mm/s -300mm/s

• Material: PLA or similar

• Supports: Not needed

If you decide to print this model, feel free to like the post, comment about it, and make your own print profiles!