ERCF v2 mounting brackets for Voron Switchwire

A solution to mount an ERCF v2 on top of a Voron Switchwire. The ERCF is angled by 60° upwards for better access. 

Parts are pre-orientated(Credits to Nero3D).

EDIT 1: The Parts are a very tight fit and need to be slided onto the extrusion from the side.

Hardware you will need: 

Frame mounting→4x M5x16 BHCS, 4x T-Nut M5 (3030)

ERCF to brackets→ 4x M3 heatset insert, 2x M3x8 SHCS (bottom), 2x M3x10 SHCS (top)  

Enclosure?

I will enclose my printer soon. At this point I am not able to tell you, what modifications are necessary to the enclosure panels.

EDIT 2: For now it seems, that this mount is not compatible with the stock enclosure. The ERCF should be positioned a few mm more to the front of the printer and may be mounted vertically. You will definitely lose some Z height with an enclosure, because the bowden tube needs to go somewhere. If I have a good solution, I may update this or upload a whole new design.

23.03.25 - Included step files for each part.