ESP32 Modular Dev Kit (Arduino)

The Modular Dev Kit allows for the optimal mounting of actuators and sensors, making it perfect for pre-tests without damaging the components or the testing environment. These elements are securely integrated into the Dev Kit. Additionally, the ESP32 mount enables the microcontroller to be fixed in place, protecting its electronic components during tests. The mount also features labeled pin outputs for easy identification.

For printing the ESP32 mount, a 0.4 mm nozzle is sufficient, but for the best results, a 0.2 mm nozzle is recommended due to the intricate engravings. Please note that the ESP32 mount consists of three parts: the main plate and two stand legs, which simply need to be assembled.

All parts can be printed in PLA with an infill of 5% to 10%. Refer to the provided images for the correct printing orientation of each part to avoid the need for support structures. A layer height of 0.2 mm is perfectly adequate.