Large scraper/ spatula

Simple design with no supports, can be printed at various layer heights.

The model 200 x 200 x 11mm and around 50g depending on settings.

The design was made with a 1mm scraper edge for my intended use, but the model can be lowered in the slicer to make the edge sharper.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Doesn't Matter

Supports:

No

under 0.24 recommended

Infill:

10-20%

Geetech PLA ](http://www.amazon.com/s?url=search-alias&field-keywords=Geetech+PLA&tag=thingiverse09-20) brown

Notes:

make sure travel within the part is enabled so no stringing occurs

Post-Printing