Dungeon Meshi Cover HueForge and AMS 4 Colors

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Steel Grey
At layer #11 (0.96mm) swap to Silver Smoke Grey
At layer #18 (1.52mm) swap to White for the rest.