Tesla Model Y 2024 Air cover (German Berlin made)

Air vent cover for the rear vent underneath the seats, specifically made for the Model Y 2024 from Berlin Germany (see pics).

The STL is a plain block to allow custom mesh density using print settings.

Use thin strip of double side tape (like 3M VHB) to keep in place.

Printing instructions (MANDATORY):

• PETG or other heat resistant filament
• 0 top layer
• 0 bottom layer
• 6 perimeters (with a 0.4mm it will end up at 2.88mm thickness)
• Infill 15%+ honeycomb (fill angle 0)