SDS011 particulate - dust sensor PM2.5 and PM10 case

I purchased the PM10 & PM2.5 sensor sds011.
As many have done I added the temperature and humidity sensor.
everything managed by an Arduino esp32 and Matt, sending data to my DB influx and graphing everything with Grafana. Of course with node-red for managing some of the aspects.

there are many cases on thingiverse, but most of them put the sensor in a position which is not suggested by the producer (I have also added some pictures from the producer).
So I decided to make one mine., very simple, but that can be used in 2 positions as suggested.

It is designed in fusion360 so if you want to improve it you are welcome, just let me know.
the esp32 it is just attached I did not have enough time to make a better positioning.

as usual just enjoy ;)