Empty Bottle Carrier alias EBC for PET bottles

Transporting and collecting PET bottles made easy... this is EBC :)
25
85
3
344
updated July 11, 2024

Description

PDF

E… B... C… easy as  1…2…3…

 
ENG:

I've had enough of the PET bottles that I want to return being scattered around in the lacquer in an irregular manner, and their transport in a nylon bag wasn't exactly convenient either! 

And so the EBC (Empty Bottle Carrier) was born!

I wanted a simple, easy-to-print model, which still fits the purpose extremely well. You can easily snap in and out of the open "O" rings to collect the 0.5-2.0 liter bottles, and then with one easy movement, you can transport the bottles to the exchange place in an orderly manner!

I hope you like the idea as much as I do! :)

  • Printing from PETG for flexibility and adequate strength, recommended!
  • 0.2-0.3 layer , minimum 25% infill, best for me is trangle and gyro

 

HUN:

Elegem lett abból, hogy rendszertelenűl, össze-vissza kallódnak a lakásban a visszaváltani kívánt PET palackok, valamint a szállításuk sem volt éppen kényelmes egy nylon zacskóban! 

Így hát megszületett az EBC (Empty Bottle Carrier)!
 

Egyszerű, könnyen nyomtatható modellt szerettem volna, ami mégis rendkívül megfelel a célnak. A nyitott "O" gyűrűkbe könnyen be és ki pattintva tudod gyűjteni a 0.5-2.0 literes palackokat, majd egy könnyed mozdulattal, rendezetten tudod szállítani a palackokat a visszaváltási helyre!

Remélem neked is úgy fog tetszeni az ötlet, mint nekem! :)

  • Nyomtatás PETG-ből a rugalmasság és a megfelelő szilárdság érdekében, ajánlott!
  • 0.2-0.3mm réteg , minimum 25% töltet, nekem a háromszög és a gyro vált be!

Tags



Model origin

The author marked this model as their own original creation.

License