Circle Cutter

Printed 10-40mm radius cicle cutter using scalpel type blades. Other designs were too bulky for my needs and needed hardware I didn't have, I used spares from Voron kits.

Printed in eSun PLA+ at 200C with 0.15mm layer height and 0.5mm nozzle.

These STLs were sliced in Superslicer 2.5.60 with better bridging improvements where suspended overhangs such as the inverted nut/screw holes are filled with bridges, please choose the ‘bridged’ version of the prints if your slicer doesn't have auto supporting bridges.

Required hardware:

M3x16 SHCS/BHCS

M2x10 Self Tapping SHCS

2x12mm Dowel sharpened (any sharpened pin 2mm diameter will do)

Scalpel type blade for hobby knife