VORON 2.4 TRIDENT CANOPY TOP HAT NEOPIXEL LED MOD!!! CONTROLLED BY MACRO!

…Please be sure to hit like & post a make, I'd love to see your prints!

Here's my new Neopixel LED Top Hat Mod! Add lights to the very top of your printer so you can easily see what its doing from a distance or in a busy room/farm!

These lights can be controlled by the standard macros.

BOM:

3x GRB Neopixel Led's

Cable to wire (size of your printer!)

12x M3 6mm Cap head bolts

12x Voron BOM M3 heat inserts

Small squares of sealing tape or VHB tape for inside covers to hold LED's still, see photo!

This .cfg file for it to work! This file uses 2x LED CHAINS!!

https://github.com/3DPrintDemon/Voron-Stealthburner/blob/main/Firmware/Neopixel_Control.cfg

*** If you don't or can't have 2 LED CHAINS please use the standard Stealthburner_leds.cfg file & add the Top Hap LED's to that single chain.

https://github.com/3DPrintDemon/Voron-Stealthburner/blob/main/Firmware/stealthburner_leds.cfg

If you need a full macro suite to control them check this out!

https://github.com/3DPrintDemon/Demon_Klipper_Essentials_Unified

My remix Top Hat can be found here:

https://www.printables.com/model/594894-voron-24-trident-canopy-top-hat-remix-split-model-

My top panel clips can be found here:

https://www.printables.com/model/594870-voron-24-trident-top-hat-top-panel-clips-no-hardwa

My simple cable channel ideal for LED cable routing

https://www.printables.com/model/1035301-simple-strong-easy-to-print-push-in-cable-channel

The original Top Hat model is here:

https://www.printables.com/model/568090-voron-24-canopy

PRINTING:

Print Logo Diffuser in Transparent PETG

Print LED Cover in ASA/ABS - Voron BOM settings