Touchscreen for Prusa Enclosure
Housing for Waveshare 5 inch touchscreen display and Raspi for attachment to the Prusa Enclosure (or anywhere else).
0
8
0
144
updated August 18, 2024
Description
PDFI took the power supply directly from the Raspi board (not from the USB-C). For this you need an adapter (see picture). The case requires support when printing (see picture). Additional M3 screws and nuts are required for assembly.
I used this display:
Waveshare 5 Zoll Touchscreen Display
and this adapter:
DELOCK 65485 Adapter
Model origin
The author marked this model as their own original creation.
