Fidget Clicker

Print in PLA for less resistance and quieter clicking and in PETG for more restistance and louder clicking.

Assembling

Print out all parts..
The middle part will be pressed inside the bottom part.
The lever will be inserted into the middle part.
Last but not least, close the fidget toy by attaching the bottom with the top part. 
It should all be so tight that no glue is required.

Printparameter: 

Layer height: 0.2 mm
Line width: 0.4 mm 
Walls: 3
Infill: Cubic 15%
Support: no
Brim: no
Printtime: ~40 minutes

Used Filament: Elegoo PLA+
Used Slicer: Orca 2.0.0
Used Printer: Elegoo Neptune 4 Pro

I hope you like it as much as I do!
In case you have suggestions for improvements, please contact me!