CWWK X86-P5 Devboard Case

Print settings:

• Material: PETG, ABS, or ASA
• Layer height: 0.25mm
• Wall loops: 3

If you want to have the honeycomb holes for ventilation, like how I have in the photos, add a modifier to the first 2.5mm with the following settings:

• Infill: Honeycomb 20%
• Top/bottom layers: 0
• Wall loops: 8

There are two variants of the case:

1. Rev 1.1: With red USB ports and an FPC cable.
2. V3: With blue USB ports and a twisted power cable.

Mine is Rev 1.1 and the case fits quite nicely. However, since I do not have access to the V3 model, I can not test if it fits. If you have the V3 model, feel free to provide the dimensions and I will update the models.

BOM:

• Four M3 brass inserts
• Four M3x6 countersunk screws
• Four M2x6 countersunk screws
• (Rev 1.1 only) Two more M3 brass inserts and two flat head M3x6 screws for the retention bracket.