This another version of the Monty Python's Ministry of Silly Walks wall clock.
Based on the stencil prepared by Jan Flaška, modified substantially.
This clock has been designed to fit the TFA 60.3525.01 (radio controlled) and TFA 60.3024.01 (manual) clock movements, but any movement that has 8 mm shaft and can accommodate a 5 mm thick dial will fit.
If you are going to use a different movement, you may have to modify the hole diameters on the legs.
Total dimensions:
Width: 198 mm
Height: 198 mm
Thickness: 46 mm
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:No
Supports:
No
Resolution:.20 mm
Infill:
15% Honeycomb
Notes:
4-5 perimeters work best
Plan for a color/material change at Z=3.2 mm when printing the dial/face.Align the seams to rear.
Fits the MK3S bed without issues, may not fit the MINI (resize as needed, but adjust the hole diameters).
No glue required, everything should press-fit.
Category: DecorThe author marked this model as their own original creation. Imported from Thingiverse.