Impossible Twisting Hex Fidget (No Supports Required)
Fidget with this small, twisted hex and 3 petal helix passthrough. Hours of fidgeting
32
250
0
1312
updated July 10, 2024
Description
PDFPrinting Instructions/Recommendations
- 50% gryoid infill provides weight and strength so it can move through with just gravity
- 0.2mm layer height
- PLA for good finish
- Offset is around 0.4mm between objects - will not scale down well
- Print each piece in contrasting colors
- Dimensions: 60mm (height) x 30mm (base)
Tags
Model origin
The author marked this model as their own original creation.
