Tic Tac Nano Terrarium

12/12 update: the moss seems to be alive and doing well

Update: New staircase version

A simple nano terrarium made from a tic tac box.

You will need:

• Empty box of tic tacs
• Some moss
• Small plants
• Water
• Dirt

• Activated Carbon Instructions:

  1. Cover the "mesh" in the 3d printed part with activated carbon.
  2. Add dirt above the activated carbon.
  3. Add moss and plants.
  4. Water with a small amount of water.
  5. Place in a area with indirect sunlight .f3d and .step files are available if you need to adjust the tolerances or modify the design.

  Refer to images for additional instructions.

  Print Settings

Printer Brand:

Creality

Printer:

Ender 5

Doesn't Matter

Supports:

No

0.2mm

Infill:

15%

Notes:

Print at 0.2mm layer height and with a 0.4mm nozzle for best results. Refer to this article for more information on how to make your prints waterproof: https://www.bcn3d.com/waterproofing-3d-prints-5-solutions-to-creating-water-resistant-models/.