ESP32 cam enclosure with adjustable joint/mount (180 degrees)
ESP32 cam enclosure with adjustable joint/mount includes:
- modified front part of the case
- 90-degree joint
- a stand
12
42
2
251
updated July 4, 2024
Description
PDFPrinting settings: Print it with whatever material. I used PLA and it's ok. For the back cover, use the original model (file ESP32camCase_back_v04.stl).
I used tree supports, 0.1mm layer height, 100mm/s.
Assemble it with 2 screws with 7mm bolts.
Mount it horizontally (as a stand) or vertically (see the image). Use 2-4 screws to attach it to the surface.
Adjust the cam angle: 180 degrees left-right and 180 degrees up-down.
Tags
Model origin
The author remixed this model.
ESP32 cam enclosure
Original model was switched to draft or deleted
Differences of the remix compared to the original
- Added a mount part to the enclosure (original model ESP32camCase_front_v04.stl)
- New: 90-degree joint
- New: A stand/mount
