Seeed Studio ESP32S3 Project Babble Mount Universal

Modified to fit a larger 160 deg FOV camera, new mounts with proper tolerance to fit an m5 bolt. (Commonly used for GoPro.)

Included an extension arm I made for this and a universal mount designed to fit the Index.

Attach the mount with double sided tape. I used an old command strip and cut to size.

Needs supports.

Everything should be snap fit. Even the LEDs I didn't glue in place.

I printed solid. 5 walls.

I used 3 IR LEDs with a 1kOhm resistor. Lights up the face nicely so far.

LEDs I used are from Digikey. You can find it in the recommended hardware from the EyeTrackVR Github.

Included different extension arms I made in case you need more distance. Babble img is using just the case and mount.