Cat Tree Support Bracket - Easy to Install, No Disassembly Required!

Do you want to add extra stability to your cat tree without the hassle of taking it apart? This 3D printed Cat Tree Support Bracket is the perfect solution! This bracket is designed specifically for 75mm tubes and comes in two parts, allowing you to install it without disassembling your existing cat tree.

• Easy Installation: The two-part design means you can install it directly onto your cat tree without removing any existing parts.
• The parts are fastened together with M2 screws of 20mm length. I used hex screws and corresponding nuts, but feel free to use similar alternatives.
• The design includes a central hole for an additional screw if extra stability is needed. In my case, it wasn't necessary.
• To secure the bracket to the wooden tube, I recommend using M2 wood screws of 16mm length to avoid penetrating through the wood. Alternatively, M2.5 screws can also be used if preferred.

I printed the bracket using PLA Marble Coffee filament

Whether you're looking to extend the life of your current cat tree or add an extra layer of stability, this support bracket is a must-have. give it a try.

I hope this support bracket is as useful for you as it has been for my cats. Your comments and makes are greatly appreciated!

Download now and give your feline friend a safer, sturdier playground!