IKEA Alex Gridfinity Inlay

In Fusion 360, you can adjust the dimensions and positioning of your plate design by navigating to "Modify -> Change Parameters." Here's how you can modify each parameter:

• grid_width: Set this to the desired width of your plate.
• grid_height: Set this to the desired height of your plate.
• material_height: This is used to represent the thickness of the plate in 3D space.

Positioning adjustments:

• center_left: Set this to 1 to center the grid to the left or 0 to align it with the edge.
• center_length: Set this to 1 to center the grid along the length or 0 to align it with the edge.

For laser cutting, such as using Lightburn, go to the "Sketches" panel, select the third sketch, right-click, and choose "Export as DXF." This will prepare your design for laser cutting.