1x1 Gridfinity Dremel Accesories Holder

1. Introduction

Dremel  accesories holder for gridfinity......optimised to get a lot of accesories by 1x1 grid and with ease of use.

2. Revision History

3. Printing Instructions

1. All elements
   • PETG/PLA
   • Layer Height: 0,3 mm to speed up the print
   • Min 2 perimeters
   • No supports
   • Min 15% infill

4. Materials for Assembly (BOM)

• The printed parts
• Your Dremel accesories

5. Assembly Instructions

1. Nothing to say…just install your holders on a gridfinity grid. And Sort your accesories as per pictures for isntance.

5. Notes

• G-code file only made for MK3S+. The file contains some custom lines to add a pre-heating before the printing to avoid oozing during the mesh bed levelling. And a timer at the end of the print to buzz a sound once the parts has cooled down. 
• Do not use the g-code file on other machines than MK3S+ ! In any case, I recommend you to slice the .stp files by yourself to make your own g-code files.

Have a nice print !

Last note! I've spent quite a lot of time designing, iterating and prototyping on all my models. Therefore, if you enjoy them, please don't forget to like+download and then rate them, so that I can earn so prusaments to continue ;)

Same base.