Lazy Rabbit
Lazy rabbit minimalist sculpture
810
3552
66
8732
updated June 25, 2024
Makes
Comments
I like the model, but I really don't understand why the thing is hollow instead of flat at the bottom. There may be some problems without brim.
Hi! It was designed that way in order to save some material. The inside walls are set in an angle which you should not have problems when printing without supports!!
@Artmonso_322348 the inside looks clean, may be the better option to use just 5% gyroid infill with 2 perimeters and 3 top/bottom layers to save filament like I did. But it's cute anyway and I think I'll print some more :)
Very cute! Tested some copper silk PLA with this model and it worked well.
I don't fully understand the underside and think it would have been better to keep solid and use a less infill setting
You made some effort to hollow it out, but why?
In FDM-prints the objects are nearly empty inside anyway (infill) and hollowing it out increases the (solid) surface area. So i’m not sure if the hollowed out version uses less material at all…
Very nice and quick model, printed one normal and one with Fuzzy skin 0.3mm
Sliced with Orca Slicer, printed with Artillery PLA+ Bronze at 210°C and 60°C bed.
