K40 laser bed z-axis

k40_z-axis

Z axis for the K40 laser. This project is for metric extruded aluminium tubes and L profiles (both 10 mm). (The others I could find were for imperial tubing)

The parts to print are stored at the stl folder. In addition the svg files in the root folder were cut out of acrylic. These files are for the motor holder and the belt tensioner. (The belt is tensioned by pulling the base of the motor backwards)

You need:

2 times base.stl

2 times base.stl mirrored

1 times base_belt_guide.stl

2 times belt_bearing_guide.stl

1 times slide_special.stl mirrored

2 times slide.stl

1 times slide. mirrored

1 times endswitch.stl

optional some clamp.stl

endstop switch

See also https://github.com/maxpautsch/k40_z-axis