Lutron Pico mount (magnets) with detachable weighted base

Weighted base section printed out of TPU, upside down with no bottom layers to allow component to be loaded with lead shot.  Vary infill density dependant on lead shot size.  

Base and mount require some support, but easily removed.

Glue weights part into base.  I used Silicon:  

https://www.amazon.ca/Permatex-59103-Clear-Silicone-Sealant/dp/B07Q6XNV8V/ref=asc_df_B07NQNJPTP/?tag=googleshopc0c-20&linkCode=df0&hvadid=335587150048&hvpos=&hvnetw=g&hvrand=3487200489593726112&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9104745&hvtargid=pla-903420259081&mcid=0aa66d7c63ce32c3a446f7da20944e63&th=1

Embedded magnets used:

¾" x 1/8" https://www.leevalley.com/en-ca/shop/hardware/rare-earth-magnets/magnets/disc/32065-rare-earth-circular-magnets?item=99K3211

6 mm x 2mm magnets to secure mount to base https://www.amazon.ca/JIANTA-Magnets-Refrigerator-Neodymium-Whiteboard/dp/B0CRHFD4DD/ref=sr_1_1_sspa?crid=3J7RX8F6B5A4Y&dib=eyJ2IjoiMSJ9.67hbW4_FcHCC9PEZhegWJxsQN-wVmFf26twQAeYR6167H881NiGRWcLRODXBBKuvAhZhPtJHLbk8MgcCrkdsZZlUtvEFNxS4ZggsHBsujLQXFxZL9EomJlEmX3GwklBIFzq5s1N4_1BrAq6QGW366yvoLa54lB53uZF1kkOykxngy8Nx7-SJRVm3oQXtQsO8fgfHU-4Dcpp6cf024i58qO7gQwuT7AlZKkg1ey5QqxQhWRCT_fMsgSnPUrGunfz8ztYrToGrDOYO7tlyi9t3Xk5MykDKLB8b9WJI1kbc9Uk.UJjB9ivwqNlVkI9vQzX6FrtzeTdayDiQQ3umsTTCM3w&dib_tag=se&keywords=magnet+6x2&qid=1719026309&sprefix=magnet+6x2%2Caps%2C170&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1

Liked the original design aesthetic,  but wanted to add these additional funtionalites.  

• redesigned to have Pico attached via magnets
• allows mount to detach from base to allow it to attach to metal surfaces (2nd purpose behind the magnets).  
• Increased size of TPU feet to an entire base to allow it to be loaded with more lead weight.
• diamond grip pattern on TPU weighted base part.