Makita mini box holder for Multiboard

I wanted to mount my Makita drill-bit boxes onto the multiboard tiles.

So i fired up Fusion 360 and start designing this part.

The holder makes use of the holes at the backside of the box, and fits quite snuggly, to take them off the wall, pull them up.

The Holder itself, get bolted to the multiboard tiles by using two low-profile 9mm T-bolts. Just make sure the head of the bolts, are flush with the holder when screwed into the tile.

Print with a 0.4 nozzle in PETG with minimal 3 wall thickness and 15% infill.

Please let me know if you have any comments on the design, I'm still trying to improve my skills with fusion360:-)