Printed at .2mm layer height in extrudr PLA NX2 yellow.
Planter 02 (SC)
Simple planter with a few branches / grass - ornaments.
340
1792
27
5916
updated November 30, 2023
Makes
Comments
@Asraiel_258891 That's a great print. And the colors of the planter and of the plants are perfect. Love it. Thank you for sharing your great make and for the overwhelming rating.
@MrHanMan_263135 Another great one that's hard to print in this color. Well done. Thank you for sharing your make and for the overwhelming rating.
@Ihgedasila_747252 That's a great print. The plant is a great match for the little planter. Thank you for sharing your make and for the overwhelming rating.
@m750 Great color. Thank you for sharing your make and for the overwhelming rating.
Loks good. Printed shell version. Walls are nice and solid, but the bottom is way too thin.
View 3 more comments
@Wilko 3mm solid infil would be ok, or I should print the bottom with more layers. I thint my settings was 2 layers with 15% infil and in PLA it was kind of soft to the touch and it can bebheard layer sepparates from the infil. "cracking sound when slightly press). Layer adhesion was very good judging by the outer walls.
@Restless_Maker 2 layers is really low. Default is 5/6 if I recall correctly. I use a wider nozzle but I'm using them for 4 years now (outdoor and indoor) and they still work. Perhaps you can just print the bottom to test settings for yourself to check if it would work for you.
Made a very tiny version, in very bright filament, so we wouldn't forget the smallest plant in the house.
@Berry_867689 That's so cute! It looks kind of different. That's amazing. Thank you for sharing your make.
@Timo_183470 That's a clean print. Great color. Love that you modified it to your needs. Well done. Thank you for sharing your make and for the overwhelming rating.
@martinjuru That's a lovely two color print. I like it. Thank you for sharing your make and for the overwhelming rating.
Nice vase and print, was printing the shelled models and did a resize - had to fix some of the features in the f3d file for that (and made the inner shell follow more closely outer shell) - will post remix for that
Also the f3d files were mixed up for shelled and vase mode
Colours: prusament pla lipstick red, prusament petg ocean blue (edited)
View one more comment
@Wilko the reference of which circle is the start for the ornament had to be changed when adjusting the wall width, width and height of the planter for some reason..
Maybe I messed up when changing the parameters of the model 😁
Printed in metallic PLA (a strange side effect of which, is that the planter is magnetic).
It printed really well, and relatively quickly given the size. It looks fantastic.
Great tip from the flower-store clerk who saw me trying to fit a plant to my new 3d-printed planter: get the plant first, then scale the planter to accommodate the plant!
@nexxius What a great print. Gray is always a good choice in my opinion. And the hint from your flower-store is perfect.
Thank you for sharing your great hint, perfect make and for the overwhelming rating.
@rembomy You're welcome. I love it when people customize things to suit their needs. Well done, great print. Thank you for sharing your make and for the overwhelming rating.
@Charlie60_161724 That's a clean print. Great color / plant combination. Love it. Thank you for sharing your make and for the overwhelming rating.