I needed storage crates for a specific cabinet which were larger than my Bambu build area (250x250mm). This crate prints in 2 large pieces which are joined by 4 pegs. The base has a small interlocking bevel to seal the gap and add minor bit of strength. The crates nest securely when stacked.
Dimensions:
- 360 x 215 x 50
- 360 x 215 x 90
If needed, can remixed to be stronger with thicker base and a more secure interlocking joint between the bases. However for my application these are plenty strong when printed in PLA.
The author marked this model as their own original creation.
