Atari Logo Lightbox - Led Lamp

My Patreon ----- https://www.patreon.com/Valda3DPrinting

ATARI Logo as Lightbox lamp

Choose your color scheme from slicer

You will find each file named by color for an easy setting.

Import them in Bambulab/Orca as single object with multiple parts.

Assign each color to the same named part ("wall" is usually withe to create a nice bright outline)

There are 2 “Backbox” files:

- one with no holes, you can provide by yourself in the slicer according to your type of wires.

- one with housing for this led controller ---→https://s.click.aliexpress.com/e/_DBEjnv7

Use a PEI Textured plate for an optimal result

Print White for last

To achieve a nice result be sure to have settings as follow

first layer flow ratio = 1.05

wall transitioning threshold angle = 50°

Infill/wall overlap = 20%

Avoid crossing walls

Once you have printed the model glue inside the backbox a ledstrip (multicolor or withe) and wire it trough the provided hole… you have your lightbox ready! ^_^