Ikea ADILS leg extender ~10cm
I wanted my desk to be a bit higher, so i created this leg extender.
2
33
1
151
updated June 18, 2024
Description
PDFThis extender makes the table roughly 10cm higher. It makes the desk a little less wobbly also.
You need to remove the height adjuster(just unscrew it) on the bottom to be able to use this.
If your printer is not that precise, then scale it to 101-102%.
I used PLA, 25% infill and 3 perimeters.
Tags
Model origin
The author marked this model as their own original creation.
