Ultra minimalistic holder / mount for ESP32 Cam

A small holder to fix an ESP32 Cam to an enclosure. The ESP32 Cam with the corresponding supplyboard just clips in to the holder. To mount the hinge, simply use a piece of 1.75mm Filament. The holder can either be screwed to the enclosure with m2/ m2.5 oder woodscrews with an maximal diameter of 2.5mm. Otherwise it also could me mounted with doublesided tape.

I printed the model with Prusament PETG and a layerhight of 0.15mm and a 0.4mm nozze. The whole print takes less than 10 minutes on a Prusa Mk4.