Pill style container

A small container with external dimensions of only 80mm high (3.15") and a diameter of 25mm (1") (varies by model) this container offers an internal space of 76x20mm (3"x0.78"). The models can be combined with each other, they can also be made with or without the hanging ring.
Recommended settings:
layer: 0.2mm or less
walls: 3
infill: it doesn't really matter, it should come out almost completely solid.
Material consumed is approximately 20 grams, I suggest you print them from ABS or ASA (or another material with high UV resistance) in case you want to use them outside.
In order for the thread to work properly, you must have a printer capable of achieving tolerances of at least 0.2mm.

I hope you enjoy!
Happy Printing!