Bartop Arcade for Raspberry Pi with 10" Screen

This is a remix of PiCade-HAT Based 10" HD Mini Bartop by Zurkeyon https://www.thingiverse.com/thing:2099016 which is a remix of malopezn's Arcade Cabinet http://www.thingiverse.com/thing:768663. The aim was to simplify the build and use a single Raspberry Pi power supply with no soldering required and still use a 10” screen. Doing this however makes the power draw close to the limit but it is doable. Please note I do not include how to setup the emulation software there are plenty of guides on how to do this with Retropie or Batocera. It is a fairly simple build but can be a bit tricky fitting components together as there is not a lot of space for your hands and you may need to make a modification or two if parts do not quite fit together or sit as they should. It is however very enjoyable to do.

Build and Material Guide in Files Section.

The aim was to simplify the build and use a single Raspberry Pi power supply with no soldering required and still use a 10” screen. Doing this however makes the power draw close to the limit but it is doable