Case for BTT SKR Pico and Raspberry Pi

This case for BTT SKR Pico allows you to have the control board and the Raspberry Pi in the same case!
It's optimised for a perfect cooling: the mount for a 50mm radial fan provides cooling to both the boards to avoid any overheating.

The holes on the side have been placed in a position that let you remove the cables as easy as possible to let you move them really quickly!

To complete the build the following parts are required:

• 8x M3 threaded inserts (4x5.7)
• 4x 10mm M3 screws
• 4x 5mm M3 screws
• (additional screws for the fan are required too)

This model is really solid even if it requires a low amount of filament to be printed.

Any print settings can be used to achieve the best final result.