Micro Robot arm (9g Micro Servo)

WARNING: this model is not perfect, many things do not fit together perfectly and require sacrifice to assemble correctly.

The old part was 10 times too small. It is now fixed in the files that end with (- mm). I've also added a file with everyone on a platform.

A very small and inexpensive robot. 4 axes plus gripper. Build on 9g micro servo.
The robot can be controlled by remote control, Arduino, etc
I see that there are different diameter on the shaft from the servo. If the gear does not fit I'll fix a new one. Just send me the diameters of the shaft.
See it in action:
http://www.youtube.com/watch?v=_fGNWsP41S0
http://www.youtube.com/watch?v=eWSpKL0VOp8
http://www.youtube.com/watch?v=Qj7jYwfpEMc
http://www.youtube.com/watch?v=Ca4PmYkpcgg
Programming:
http://www.youtube.com/watch?v=7hBvyaEWg5I

Code:
https://github.com/BenTommyE/Micro_robot_RC_servo_IR_remote

Instructions

If you want servo that lift arm is replaced with a stronger MG955 servo see:
http://www.thingiverse.com/thing:38875
Latest uppdate

• Arm w spring.stl and Sving v2.stl
  Are to adding a rubber band and spring for increasing handle wight. Not tested yet.
• Grippper v5 with new "spring" for bether grip on the gear.
• Gear v5 is smaller for stronger gripp and fit gripper v5
• ArmFront_v3 (design for the gripper)
• Gripper (x2)
• GripperGear - mounting on the gripperservo
  You will need:
• 5 micro servo 9g and it's accessories
• 4 very small screws (for the 4 armed servo horn)
• 3D printer (made for uPrint but it should work on other)
• Some things to controll det robot - i use an Arduino and a servoshield.
  3D print:
  Enlarge 10 times before printing. And put the two measurement metric not inches.
  1 - Fot
  1 - Sving
  2 - Arm
  1 - ArmFront
  2 - Gripper
  1 - GripperGear
  Instuctions
  Servo inserted in custom holes.
  Fit the two arms together.
  Adjust the servo so that it is in the middle.
  Install the servo horn with one arm.
  Servo on the fot platform should have the servo horn with 4 arms for stability.
  I welcome suggestions for improvements.
  Robot program for Arduino:
  http://bentommye.blogspot.no/2012/12/download-arduino-kontrollert-robot-arm.html