This is a simple mount I designed to mount the Logitech C615 webcam to my Ender 5 printer. This contains two parts, a mount and a printable thumbscrew to fix the webcam to the mounting plate. I printed these both with PETG. The mount plate with about a 15% cubic infill and the screw with 100% infill.
The screw was generated since I didn't have one laying around and was too lazy to run to the hardware store. Overall, this works, but the screw didn't last after unmounting/remounting it about 4 or 5 times over the years, so your mileage may vary. I would recommend using a real screw if you can.
In order to mount the plate to the v-slot extrusion, you will need the following hardware:
The author marked this model as their own original creation.