Tesla P4 Fan Shroud

The Nvidia Tesla P4 is cheap, plentiful and easy to set up for Plex or other homelab tasks. The only problem with it is there is no active cooling on the gpu and you must provide your own. 

This fan duct solves this issue. It also stacks as long as your PC supports multiple GPUS. The Lenovo M920s does not as its power supply can only support 1 GPU and the attached pictures are for illustrative purposes only. 

If you are trying to slot a Tesla P4 in a Lenovo M920s, you will also need the replacement Front Bracket I have available here:

https://www.printables.com/model/910984-lenovo-m920s-replacement-front-bracket

Print both parts at the same time in ASA with organic supports on the build plate only. 


You will also need:

Sata to 4Pin Power Cable: https://www.amazon.com/gp/product/B0BR2S7M6M
12v 40x20mm Fan: https://www.amazon.com/gp/product/B07PXRZT7M
4x  3x25mm Hex Screw