Bookmark Stand - Retail Display

TIER 1 - You can print and use this display for retailing your bookmarks. 

TIER 2 - You can print and use this display for retailing your bookmarks. You can print the stands and sell them.  

This is a retail display stand I made for bookmarks. It can display 12 different bookmarks at the same time and is sized for 60x180mm bookmarks. There is also a space at the front that is recessed 2mm so that you can add a front deco plate which should be 200x50mm. The slots are at a 15 degree angle so the they have better visibility when it is displayed on a standard folding table. 

Printing: I printed this on a P1S. The tolerances were a little tight but I just used a rubber mallet and that took care of it. It will not come apart without a lot of force, but that is what I wanted as random people will be manhandling it. You can also print the bookmark holders and the 3 cross braces at ~99% uniform scale if you want the tolerances looser. If you do this make sure to scale your front deco plate by the same value or it may be too big to for the recessed rectangle. 

Frame: Printed at 0.2mm layer height, grid infill @10%

Deco plate: This can be made as a Hueforge or a standard extruded model and printed accordingly. The one in the photo is a Hueforge I made quickly, and I will probably redo it and add the prices underneath the “3D Printed Bookmarks” text. 

If you have any questions just ask.