wyze pan cam creailty k1 mount

bolts to the side with longer screws then the wyze pan cam bolt mounts the cam to the mount and you can swing it out of the way to open the door or remove it if you wish has retainer for usb cord as well 

you can mount it level all 4 pins used  to have a flat view of the nozzle and bed or one pin set up to have a look down view or all 4 pins in and the spacer with a heatsert and screw and washer to have it locked with all 4 pins and downward view 

printed the k1 mount in polymaker polyterra PLA 5 walls 5 top and bottoms 25% gyriod infill no supports

printed the wzye mount in polymaker abs 5 walls 5 top and bottom with supports 40% gyriod infill door handle opening down

printed spacer in cheap white 5 walls and 5 top and bottom 25% gyriod infill