Swiss Army Tank

If you like my work please consider supporting me HERE :

-------------------------------------------------------------------------------------------

A little update

If the cannons are too loose or don't stay in place

insert  a toothpick in the gap shown in the image and break its tip there. 

I swear it is by design and not something i discovered by accident.

----------------------------------------------------------------------------------

A project no one wanted or asked for .

Recreated from a meme.

This monstrosity is 230 mm in length fully extended , 93 mm wide and 80 mm high.

To be honest i wouldn't like meet this thing on the battlefield in WW2 this thing is terrifying. Its bold colors just show that it doesn't need camouflage, it's scared of nothing .   

General Info

• Assembly guide Included
• No need for multi color printer , everything is color separated.
• Guns and tank tracks are connected using filament.
• Included filament cutting jig to cut filament for track links  

Functionality and Features

• Fully articulated .
• Wheels spin freely , and tracks spin with them.
• Tracks have some resistance but it can be driven on non smooth surface

Printing info 

• Almost all the components except Latch, Cover  is printed at 0.2 layer height 0.4 nozzle.
• Printing settings are set in 3mf files , but please change filament and a printer settings to your printer.
• PLA + or PETG needed for wheel pins and turret base, regular PLA may break while insuring them into wheels  

Assembly Notes

• Wheels pins may be tricky to connect to wheels , some force needs to be applied . Same goes to turret base.

Happy 3d printing