Camper/RV Sliding Closet Mirror Latch

Door latch for a sliding mirror closet door for RV/Camper. My specific camper is the Coachmen Catalina 343BHTS. From what I can tell most RV/campers utilize either the same latch or very similar sizes with the overall same shape. 

Material: PETG 

designed with 0.6mm nozzle in mind but should work just fine with 0.4mm

Layer height: .2-.3

Perimeter: 4

Latch body should be printed as shown in the picture with the profile facing the Z axis to provide superior strength when in use. 

The washer plate was created to distribute the stress of the screws across the part to prevent them from splitting the latch body along the layer lines. So this should be printed with the countersinks facing the Z axis.