SS.11/AGM-22 guided missile

Crude 1:10 model of the SS.11 wire guided ATGM with removable warhead and back for easy printing. 

I couldn't get good pictures showing the motor nozzle and cable coil, so the model is a rough approximation.

Printing/Slicing:

• 15% and triangular infill.
• 2 layer walls.
• Adaptative layer height, especially for the warhead. For the rest 0.2mm.

Printed on a Creality K1 with Grilon3 PETG  filament (Gris Acero color) and 0.4mm nozzle diameter.

-V1: 2 pieces, harder to print.
-V2: 3 pieces, and wings reworked.