Still learning how to create 3D models for printing so if you have any issues or suggestions please let me know. Scale for 1:12 figures. This is version 1.
I provided 2 options for the pipe. I split it in half (pipe_split_x2) to allow for easier printing and you will need to glue both halves together.
For the handle, my idea was to have it be able to move up and down. You can use a metal wire or paper clip to stick it in the holes.
The holes on the side of the (main_base) are for “wires”, you can use a old cord and just glue it in there.
The author marked this model as their own original creation.