10 cm protractor with mm function (Accurate)

There are very few measuring tools online without mm function for some reason, so I made my own.

Marks are 0.5 mm high with a 1 mm. Flexible, but robust

Note: Black markings are drawn on with permanent marker for simplicity. I do not recommend pausing the print to change filaments to mark the numbers and notches in a different colour as testing has resulted in all sorts of issues.

• Weight: 2.92 g
• Time to print: 30 m
• Layer Height: 0.2 mm (no need to print 0.1 mm)
• Infill: 100%
• Brim: No
• Filament: PLA+ Silk.  However, any filament could be used.